A Cr/Sc mirror for the water window

A 400-bilayer chromium/scandium mirror calculated at 3.12 nm, just above the scandium L edge: ideal peak reflectivity, bandwidth and angle dependence.

EUV Insight · Calculated example · Updated
0%3.09020%3.10540%3.12060%3.13580%3.150Wavelength (nm)
400 Cr/Sc bilayers on silicon: 62.3% peak reflectance at 3.120 nm. Reflectance versus wavelength; the dashed line marks 3.12 nm. Normal incidence, unpolarized, smooth interfaces. Calculated, not measured.
Open this design in the app ProRepeated multilayers require Pro.

Why this design

Chromium/scandium mirrors work just above the scandium L absorption edge near 3.11 nm. That sits inside the water window between the carbon and oxygen K edges, where water is comparatively transparent and carbon absorbs.

Design inputs

Inputs for the Cr/Sc · 3.12 nm example
InputValue
Bilayers400
Period d1.5575 nm
Absorber fraction Γ0.4
Absorber0.623 nm Cr, 7.19 g/cm³
Spacer (on top)0.934 nm Sc, 2.985 g/cm³
SubstrateSi, 2.33 g/cm³
Wavelength range3.09–3.15 nm, 161 points
IlluminationNormal incidence, unpolarized
InterfacesSmooth (no roughness)

Calculated result

How the peak builds as bilayers are added (normal incidence)
BilayersPeak reflectivity (%)Peak wavelength (nm)FWHM (nm)R at 3.12 nm (%)
10035.803.11800.022534.73
20056.633.11930.016256.43
40062.283.12030.013662.26

Adding bilayers raises the peak and narrows it until absorption in the upper layers stops deeper interfaces from contributing. Past that point, more layers add deposition time and accumulated thickness error without adding reflectance.

The same stack at other incidence angles
Angle from normal (°)Peak reflectivity (%)Peak wavelength (nm)FWHM (nm)R at 3.12 nm (%)
062.283.12030.013662.26
2.561.083.11900.013459.55
543.803.11490.014014.28
1012.253.07400.01560.80

The peak moves to shorter wavelength as the angle from normal grows, so reflectivity at the fixed design wavelength falls even while the peak itself survives. The angle rows are calculated over a wider wavelength range so the shifted peak stays in view. A mirror used off-normal needs a longer period.

What this model leaves out

With a period near 1.56 nm, each film is only a few atoms thick. Interface roughness of a few tenths of a nanometer reduces the reflectance of fabricated mirrors far below this smooth-interface result. Tabulated optical constants are also least reliable close to an absorption edge.

The calculation uses bundled reference optical constants and a planar stack. It does not establish mechanical strength, thermal behavior, lifetime or fabrication feasibility.

Next steps

  1. Open the design in the app and confirm the inputs match the table above.
  2. Add interface roughness or a capping layer and compare against the pinned ideal design.
  3. Run a wavelength × angle map over your illumination range, then a thickness-tolerance analysis against your reflectivity requirement.

Calculated with the production solver from the bundled optical reference tables, not measured samples. Example-data fingerprint: 1f022e35fcfc99b7. Assumptions and data sources.