Design EUV thin-film optics and estimate yield before you coat

Model multilayer mirrors and filters with optimization, standing-wave fields, wavelength × angle maps and Monte-Carlo yield. The mirror below runs on the same solver as the app, and the sliders change it.

The free plan covers filters up to 3 layers and needs no account. Multilayer mirrors, the optimizer, tolerance analysis, maps and export need Pro.

Live multilayer mirror

SiMoFilm glow and the side curve are the calculated field intensity |E|² at 13.5 nm.
0%20%40%60%80%12.513.013.514.014.5Wavelength (nm)13.5 nm73.0%
Peak reflectance
73.0%
Peak wavelength
13.48 nm
Bandwidth (FWHM)
0.628 nm
R at 13.5 nm
72.9%

Mo/Si on a silicon substrate, unpolarized, smooth interfaces. Calculated, not measured. Open this mirror in the app Pro

How we test the solver

Every change to the solver has to pass these numerical checks before it is released. The tolerances shown are the ones in the test suite.

1×10⁻¹²

Against exact Fresnel solutions

Single-interface reflectance for s and p polarization, across angles and complex indices.

1×10⁻⁹

Energy balance

R + T + ΣA = 1 on every ideal stack, with per-layer absorbed power summed from the field solution.

1×10⁻¹⁰

Solver against solver

A frozen characteristic-matrix engine is compared with the production Parratt engine on every test run.

7 decimals

Pinned reference mirror

Peak R, peak λ, FWHM and band integrals of a 40-period Mo/Si mirror are re-checked on every change.

These checks show that the calculation is numerically consistent. They do not show that it matches a fabricated optic. Methods, reference data and limits →

Pro Shown live here. In the workspace it is a Pro feature.

How the peak shifts with incidence angle

This is the same design swept over incidence angle. Each row is a full spectrum from the solver, drawn as it is calculated. The map updates when you change the mirror above.

Mo/Si, 40 bilayers, d = 6.90 nm, Γ = 0.40

Peak at 0°
13.48 nm
Peak at 30°
11.74 nm
R at 13.5 nm halves by
—

Sweeping angles…

Pro Shown live here. In the workspace it is a Pro feature.

Estimate yield from thickness errors

Each curve is one simulated coating run in which every film gets a random thickness error. The yield is the share of runs that still meet your spec. Change the tolerance or the spec to see how the yield responds.

Mo/Si, 40 bilayers, d = 6.90 nm, Γ = 0.40

—simulated yield
Samples
—
95% interval
—
R at 13.5 nm, 5th–95th percentile
—

Sampling: independent Gaussian error on every film.

The pass rate only holds for the error model you chose. The workspace also handles shared deposition errors, drift, several requirements at once and robust optimization. How to read a tolerance result →

Example designs

Six designs across the reference-data range, each calculated with the production solver. You can open one in the app or read the worked example, which lists its assumptions.

All example designs →

Free This is what the free plan opens with.

Tune a two-layer EUV filter

Adjust the zirconium and silicon thicknesses and watch the transmission spectrum change. It uses the same optical data and calculation engine as the app, and opens there with your thicknesses.

0%25%50%75%100%1.010.820.530.340.0Wavelength (nm)
Default Zr/Si example: 68.04% transmission at 13.5 nm. 100 nm Zr → 20 nm Si, freestanding. Normal incidence, unpolarized, smooth interfaces. Calculated, not measured.

Open the EUV filter transmission calculator →

The workspace

Everything above is one screen in the app. The stack is on the left, the spectrum and its metrics are on the right, and the analysis tabs are below.

EUV Insight workspace showing a Mo/Si multilayer mirror's reflectance peak at 13.5 nm, the layer stack, and reflectivity metrics
Standing-wave intensity and per-layer absorbed-power profile

Field and absorbed power Free

The standing-wave |E(z)|² profile and the absorbed fraction in every layer at the target wavelength.

Layer-stack table with a capping layer and a periodic Mo/Si group

Stack editor and optimizer Pro

A table for layers and periodic multilayers. Set the period and Γ or type each thickness, then run the optimizer or the material search.

A wavelength-by-angle heatmap showing the Bragg reflectance peak shifting to shorter wavelength as the angle of incidence increases

Wavelength × angle maps Pro

R, T or A across incidence angle on a perceptually uniform color scale, with an exact (λ, θ, value) readout under the cursor.

Manufacturing tolerance results showing a reflectance envelope, simulated yield with a confidence interval, and nominal requirement checks

Tolerance, yield and robust optimization Pro

Independent scatter, shared deposition errors and drift. A p5–p95 envelope, a pass rate against several R/T requirements, and candidates verified on fresh samples.

Two reflectance curves overlaid: a pinned Mo/Si design at 13.5 nm and a live design whose peak has shifted after widening the multilayer period

Pin and compare Pro

Pin a design and it stays on the plot as a dashed reference, with the difference in each main metric shown next to the live value. You can pin up to three designs.

Export menu with CSV, SVG, PNG and PDF options

Export for papers and reports Pro

The spectrum as CSV, figures as SVG or PNG in a clean light theme, and a one-page PDF report with the plot, metrics and stack.

Calculation methods

EUV Insight calculates planar multilayer optics using reference optical constants and a Névot–Croce roughness approximation. Material chemistry near absorption edges and unresolved scattering limit how closely predictions describe a fabricated sample.

Parratt multilayer engine

Each layer’s complex index n = 1 − δ + iβ is calculated from reference optical data and the film density, then propagated interface by interface for T, R and A.

Periodic multilayers

Bragg mirrors are expressed as N repeats of an absorber/spacer pair. Set the period and absorber fraction Γ, or enter each layer’s thickness.

Interface roughness

Névot–Croce factors reduce reflection at rough interfaces. You set the roughness for each layer to match the interfaces you expect to deposit.

Reflectivity metrics

R peak and λ, FWHM, centroid, ∫R dλ, ∫R¹¹ dλ and 11-mirror train throughput.

Data and methodology

Bundled atomic scattering-factor tables are sourced from the Center for X-Ray Optics (CXRO) at Lawrence Berkeley National Laboratory. The reference data draws on the work of B. L. Henke, Eric M. Gullikson, J. C. Davis, and subsequent contributors.

B. L. Henke, E. M. Gullikson and J. C. Davis (1993). Atomic Data and Nuclear Data Tables 54(2), 181-342.

CXRO reference and dataElement-specific updates

EUV Insight is an independent application. Source attribution does not imply endorsement by the named researchers or institutions.

EUV Insight combines these reference tables with thin-film models, optimization, manufacturing-tolerance analysis and reporting tools. Imported optical constants replace reference data for the materials you assign them to.

Reference optical data covers approximately 0.04–42 nm. Outside the tables the app leaves a gap in the plot and does not extrapolate.

How to cite

EUV Insight (2026). Multilayer EUV and soft-X-ray thin-film optics design (build 2026-11-11). https://www.euvinsight.com

Applications

13.5 nm Mo/Si mirrors

Peak R, FWHM and 11-mirror train throughput. Bragg-peak drift across incidence angle. Yield against an R spec with ±1σ per-layer thickness scatter.

Spectral-purity filters and pellicles

Free-standing Zr, Zr/Si or Nb/Si membranes: in-band transmission at 13.5 nm, absorbed power per layer, and thickness yield against a T spec.

6.7 nm BEUV and 11.2 nm pairs

La/B₄C and Mo/Y stacks: sweep period and Γ, pin candidates side by side, and see what interface roughness costs at peak R.

Detector windows and beamline optics

Filter transmission and absorbed power for XUV/EUV photodiodes. Multilayer reflectivity and angular response for beamline mirrors.

Free and Pro plans

Free

$0

forever

  • —Filters with up to 3 layers
  • —Full T, R and A spectra with metrics
  • —The stack editor and material search
  • —Results on screen (export is Pro)
  • —Up to 3 saved designs, on one device
  • —No account needed to start
Start free

Pro

Recommended

$29

per month, or $290 per year (2 months free)

  • —Everything in Free
  • —Unlimited layers and periodic multilayer mirrors
  • —Optimizer
  • —Monte-Carlo tolerance and yield
  • —Wavelength × angle maps
  • —Pin & compare
  • —Unlimited design library, synced to your account
  • —CSV, SVG, PNG and PDF export
Subscribe to Pro

Pro: $29 charged today for one month, then $29 every month until canceled. No free trial. Cancel renewal anytime; access continues through the paid period. Payments are non-refundable except where required by law.

Billing and cancellation terms

Start a design

There is nothing to install. The free plan opens with a zirconium filter you can edit. Multilayer mirrors and the analysis tools need Pro.

Contact us

Have a question, an idea for a new feature, or a bug to report? Send us a message. We also welcome feedback and account or billing questions.

Email jezdangomez@gmail.com or use the form below.

We use your details to respond to your message. Privacy policy