A freestanding zirconium filter
A 100 nm freestanding zirconium film calculated from 1 to 40 nm: transmission, reflection and absorption at 13.5 nm, with the model assumptions stated.
Why this design
Zirconium passes a band around 13.5 nm and absorbs strongly at longer wavelengths, which is why thin zirconium membranes are used as spectral-purity filters and detector windows in EUV systems.
Design inputs
| Input | Value |
|---|---|
| Layer 1 from the incident side | 100 nm Zr, 6.52 g/cm³ |
| Surroundings | Vacuum on both sides, no substrate |
| Wavelength range | 1–40 nm, 391 points |
| Illumination | Normal incidence, unpolarized |
| Interfaces | Smooth (no roughness) |
Calculated result
| Quantity | Value (%) |
|---|---|
| Transmission | 70.39 |
| Reflection | 0.05 |
| Absorption | 29.56 |
What this model leaves out
This is the optical model only. It has no surface oxide, no support mesh and no heating or mechanical-strength calculation. Add oxide layers explicitly when your film has been exposed to air.
The calculation uses bundled reference optical constants and a planar stack. It does not establish mechanical strength, thermal behavior, lifetime or fabrication feasibility.
Next steps
- Open the design in the app and confirm the inputs match the table above.
- Change a thickness and read the transmission at the target wavelength.
- Add the layers your physical film has, such as oxide, using appropriate optical data.
Calculated with the production solver from the bundled optical reference tables, not measured samples. Example-data fingerprint: 1f022e35fcfc99b7. Assumptions and data sources.